1. Download Flash ROM bin file at the end.
2. When download completed, unzip it and you will get two files usbprns2 and FIX_ML-1660_v.82.00.78
3. Make sure that your printer connected to your computer completely.
4. Drag and drop file FIX_ML-1660_v.82.00.78 to usbprns2
5. Wait for reflash until green light is on. Don’t turn off your printer when reflashing. Light will go RED to ORGAN and GREEN, just wait!
And congratulation! Your printer have been resetted
Download : http://adf.ly/Mkdeo
PS: There’s a new method but it’s not tested. You can try it:
- Cover Vcc pin on Toner Chip with tape
- Put you cartridge into printer and turn it on.
- Red light will be on, but you can print out normally.
Try it and Good luck!
Tried the new method and it don't work. The counter still counts.
ReplyDeleteDo you have reset for Samsung ml-1675?
ReplyDeleteCovered the flat pin with the two nipples on the side of the toner: worked, a lot of blinking at the led's but toner is printing again
ReplyDeleteIt worked very well
ReplyDeleteyou might be asked to re- install your driver
;)