Thursday, January 21, 2010

samsung scx 4300 solution


1. go to tech mode by menu copy left arrow right arrow menu right arrow
2. activate download by menu data setup flash upgrade local ok
3. drag and drop the fix_scx4300_v1.13_fact_romdl.hd on scx-4300\usbprns2.exe
4. printer displey data receiving flash erasing flash programning download ok
5. fix tisco tape on chip or remove chip (this stape is missing by all )
6. reset all counter by tech mode clear counter clear all counter
7. restart the printer
8. now it is working properly red light is change into green
it is tasted by me on 10 printers
you can find firmware at below link
http://adf.ly/MwTbF
Posted by at
Labels:

5 comments:

  1. AnonymousMarch 21, 2010 at 8:08 PM

    HELLO FRIEND I AM JUST LOOKIG FOR SOLUTION
    SO I FOUND YOUR STUFF HERE IT IS GREAT & KEEP IT UP

    NANOO

    ReplyDelete
  2. praffulMay 1, 2010 at 5:37 PM

    thanks for compliment

    ReplyDelete
  3. AnonymousMay 13, 2010 at 7:41 PM

    hello friend this solution is good for samsung scx 4300 firmware v1.13 only but fail in other version firmware v1.16 v1.18 v1.21 v1.28

    ReplyDelete
  4. AnonymousMay 16, 2011 at 11:49 PM

    very good step 5 was missed by all and no i have a working printer thats great

    ReplyDelete
  5. prinforDecember 21, 2013 at 12:49 AM

    Be careful. Only for printers with original firmware Version 1.13.
    The software (FIX_SCX4300_V1.13_Fact_romdl.hd) causes problems in printer with diferent firmware

    ReplyDelete

Subscribe to: Post Comments (Atom)