Sunday, January 24, 2010

if anyone upgraded his ml 1640 to latest firmware from samsung.com


if anyone upgraded his ml 1640 to latest firmware from samsung.com website so dont be worry i have the solution download software from  http://adf.ly/Mkfti   if this software helps you just give comment of thanks if you have any problem tell me i will try to solve it 

61 comments:

  1. Hi
    We are located in Pakistan
    Do you have resetting solution for Ml1660 printer too?

    ReplyDelete
  2. i dont have ml1660 printer solution
    sorry

    ReplyDelete
  3. Hi there

    The link is down.
    Can you update please?

    Thanks in advance

    ReplyDelete
  4. Does this method work on newer 1640? Please update link. Thank you!

    ReplyDelete
  5. The link is down, please update. Thanks in advance.

    ReplyDelete
  6. Hi Prafful - the link you mentioned has been deleted (Probably by Samsung not wanting us to be able to use it) can you suggest how I can get the software. (ML1640) Thanks

    ReplyDelete
  7. File is deleted. Can you please uploade the file again.

    ReplyDelete
  8. http://www.sendspace.com/file/kim0z2 is down, can you re-post one more time?

    ThankX

    ReplyDelete
  9. Pls create new link to this file.

    ReplyDelete
  10. Ciao, will the printer still work with compatible toners, to use wich i had to install specific firmaware? (still having the 2100 pages issue)

    ReplyDelete
  11. awesome!!!! have been looking for this!! so easy to use!!!! thanks so much!!!

    ReplyDelete
  12. Hi
    Cant get it working with ML 1640 firmware version
    1.29.00.96

    Hope you can help here.

    ReplyDelete
  13. Dear prafful,
    Thank you on this post, you fix a lot of problems.
    Do you have solution for other Samsung printers like CLP 315 and SCX 4623. I have them to and the same problem with them.
    Dejan.

    ReplyDelete
  14. Dear prafful,
    I Purchased samsung ml 1640 printer its working fine.after printing 1500 pages i refilled tonner, after 500 pages its stop working. i asked dealer they said initial toner print only 2100 pages so i need to buy new toner.

    one of my friend searched net and he downgrade my firm ware to 1.15 06-14-2006.

    its printing very well but the toner status message not showing. he said its ml 1600 series firmware so its not showing.

    how can i get back printer message status.

    ReplyDelete
  15. For all the user of Samsung ML-1640 with firmware v.96:

    http://letitbit.net/download/70312.7842c4bb3fb08a7c92c398be3a94/FIX_ML1640_V1.01.00.96.rar.html

    ReplyDelete
    Replies
    1. great stuff! it works!! thanks

      Delete
  16. Super it works just fine. thanks man!

    ReplyDelete
  17. Despues de muchas recargas y cambios de toner por el de la 2010, no me permitia resetear el chip, "toner exhausted".
    Ejecute el software: http://www.sendspace.com/file/2w6x.. y me permitio resetearlo

    Muchas Gracias

    ReplyDelete
  18. hello praful i have downloaded the file but it has
    .bat .exe and .fls files what should i do?

    ReplyDelete
  19. hello brother, I am rajiv kumar from yamuna nagar (haryana), as you post this link for ver. V1.01.00.96.

    http://letitbit.net/download/70312.7842c4bb3fb08a7c92c398be3a94/FIX_ML1640_V1.01.00.96.rar.html

    I download this link and after running the files they changes my ver. 96 to 96f. but still the printer is not working. when i give command to print, the green light blinks only, how it work, please help me

    ReplyDelete
  20. Dear friend,
    I have reset printer samsung 1640 printer two times with this software.One time it is reset easily with this software but second time i have to short pin 3 and 4 of IC as given in russian site than I reset with software successfully but now third time it doesn't work with all tactics. I contacted marketing manager of samsung printers he told me that resetter software works only one or two times you need to replace cartridge.
    so dear friend i seek your suggestion what should i do...?

    thanks

    ReplyDelete
    Replies
    1. I guess I am having same problem. Did you get solution for yours?

      Delete
    2. no this software works whenever printer alive

      Delete
  21. link is deleted

    Pls send me the reset software for ML 1641 on my mail-
    rushikumar.tumsare@gmail.com

    Thanks

    ReplyDelete
  22. pls help me with my ml-1640 when i upgrade/downgrade the firmware I accidentally unplug the power when it still flashing the firmware. now when i turn on the printer it will just blink once, red and amber. can you please help me how to flash currupted bios.thanks.

    ReplyDelete
  23. Must say thank you. Just clicked on the 96 .BAT file and perfect. Once again Thank you

    ReplyDelete
  24. Thanks a lot!!
    It worked fine.

    ReplyDelete
  25. thanks brother,i work good , how u r updrage the firmware ,pls tell....
    For all the user of Samsung ML-1640 with firmware v.96:

    http://letitbit.net/download/70312.7842c4bb3fb08a7c92c398be3a94/FIX_ML1640_V1.01.00.96.rar.html

    ReplyDelete
  26. hello to all.
    i upgraded from firmware 1.29.00 75 06-25-2008
    to 1.29.0096f 09-07-2010
    and cartridge page count is now 1 from 2101. i'm glad it works.
    starter cartridge was refilled once and the nut replaced with a fuse 63mA (starter cartridge does not has chip).
    anyway, i made a mistake and upgraded with wrong firmware (for ML2240) and i had 2 red lights on unuseful printer detected as ML2240.
    reflashed again with the right firmware (for ML1640) and everything is ok.

    ReplyDelete
  27. hi! can i check. does this work for ml-1660?

    ReplyDelete
  28. Hello I installed the 96 version and still the red light flashes and the ML1640 says low on toner.

    ReplyDelete
  29. Hello my printer problem is solve thank for sharing sumsang ml1640 reset.
    Thanks again nice work

    ReplyDelete
  30. thanks.....dear brother for samsung 1640 solution

    ReplyDelete
  31. Please send me samsung ML-1640 toner resetting software to my email id : digitalgowda@gmail.com and also tell me how to do it step by step

    ReplyDelete
  32. Please send me samsung ML-1640 toner resetting software to my email id : digitalgowda@gmail.com and also tell me how to do it step by step

    ReplyDelete
  33. Please send me samsung ML-1640 version 3.04.95:05 toner resetting software to my email id : digitalgowda@gmail.com and also tell me how to do it step by step

    ReplyDelete
  34. My printer firmware is on v96 and I am running Windows 7. I tried to flash using the v96 patch but when I run the bat file, although it appears to run, the screen stays at downloading...and when I hit any key nothing happens which is supposed to close the program. The printer does not get flashed. I purchased a generic toner a year ago and only now installing it...I suspect the firmware on the chip is not compatible with the printer firmware so I get an Invalid Toner message. Any suggestion to patch or flash my printer would be appreciated. Please email at iamcanadian_1969@yahoo.ca. Thx.

    ReplyDelete
  35. this firmware only execute properly on only win xp so try with xp matchine

    ReplyDelete
  36. I already tried on WinXP and same results...does not want to flash.

    ReplyDelete
  37. Hello from Canada: Yes it worked well, reset toner only without changing total page count

    ReplyDelete
  38. dear brother

    myself ravi from rajasthan trying to reset my printer ML1640 without short pin Can u help me in this regards. Plz mail me software on ravis81@rediffmail.com

    thanks

    ReplyDelete
  39. Thanks a lot! it works perfectly!

    ReplyDelete
  40. Dear Prafful, I tried this remedy earlier twice or thrice. It worked at that time but it's not working now (this time). What to do next?

    ReplyDelete
  41. Dear Praful,
    My ML 1640 firmware version is v75. Which version should I go for upgrade and where to find it?

    ReplyDelete
  42. it works but u want to try it many time

    ReplyDelete
  43. hi mr. prafful, i hav downloaded ur file . pls. tell me now how to proceed for resetting my printer. ur link has 3 files. how to use this plese tell step by stepor mail me at pushkargoel@gmail.com

    ReplyDelete
  44. after downloading ur link pls tell how to proceed for resetting the printer 1640. ur link has 3 files. pls write the method step by step on my id pushkargoel@gmail.com or reply here.

    pls help me brother

    ReplyDelete
  45. thx god my brother has flashed it into a 1660 and none of the other flash software worked ^^

    now its running again :D thx

    ReplyDelete
  46. Thanks alot, now the rebuilt toner works.

    it shows black dots though, when it prints, is that a problem of the toner?

    ReplyDelete
  47. Hi ,
    I have upgraded my ml1640 firmware to 96 version but whether it is possible to downgrade the version to reuse the older version.
    Provide the solution if anyone has it.?

    ReplyDelete
  48. It's working! GREAT!!!! Thanks a lot :)

    ReplyDelete
  49. Thank you very much for the solution.

    First I didn't know what to do. So I simply started the .bat file and restarted the printer. Afterwards I could print again.

    Excellent.

    ReplyDelete
  50. I have upgraded my printer to v1.01.0096f and the page count is resetted, and i can print documents..but the printout is too big...all the texts in the document are not shown...Anyone afacing the same probs..please help

    ReplyDelete
  51. HI, my OS is version75, and I understand that in this case is prefferable to flash to the 83 version instead of the 96. Can you please give me a link where to download it from?

    ReplyDelete
  52. firmware since 1.xx.xx84....it cannot be downgraded...i found it from another post

    ReplyDelete
  53. This comment has been removed by a blog administrator.

    ReplyDelete
  54. Can u send me the software for resetting to rapture_k@rediffmail.com

    ReplyDelete